This product (technically named Polydimethyl-Dislkelen-Ammonium Chloride) is cationic polymer and it can be completely dissolved in water.

Application :

1. The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.

2. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.

3. It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.

Specifications:

Appearance
 
colorless or light yellow sticky liquid
 

Dynamic viscosity(cps,20°C) : 1000~30000
 

PH value(1% water solution) : 2.5~6.0
 

Solid content % ≥ : 40
 

Note: our product can be made upon your special request.
 

Application Method:

1. When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).

2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.

3. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.

4. It is better to dose the product continuously.

 1mt IBC or to be discussed

 shipment : within 10 days after order

Biddle Sawyer Fortune Chem ( Asian Sales Division of Biddle Sawyer New York ) sells proven
quality of PolyDADMAC on a regular basis.

Contact Point :
Mr.  S. M. Kang, CEO
Mr.  Jingu Kang, Manager

Tel : 82-(0)51-701-9121
Fax : 82-(0)51-701-9125

Please click “ CONTACT SUPPLIER “ above so that we may reply therein or inform you the person in charge name and his/her email address and company website.

All Payment including shipping documents procedure and strict quality management to be done by Biddle Sawyer New York in cooperation with very well-trained ( including TBM : Time Based Management ) Biddle Sawyer’s overseas offices and affiliations

 Custom Manufacturing and Development Capabilities
R&D at 6 labs (affiliate or contract)
~350 Chemists at 6 facilities in USA, China, Korea, Taiwan, India and Finland
~40 PhD's, ~120 M.S.; External consultants welcomed
~400 combined hoods
Up to 100L vessels in labs

Development Services
Tech Transfer
Process R&D
Analytical Development
Custom Synthesis; FTE
Kilo lab production
 
Analytical Equipment
LC's GC's LC/MS GC/MS NMR IR UV KF
 
Production Capabilities
Production at 6 plants (affiliate or contract)
>150 vessels at 6 facilities in USA, China, Korea, Taiwan and Finland
>2000m3 capacity
Vessels from 300L to 10,000L
Temps from -80 to 350C
 
Production Services
Tech Transfer
Scale Up
Optimization
Non-GMP and GMP (FDA inspected)
Pilot to large commercial scale